Features
-
Digital PID MICROPROCESSOR Temperature Controller with timer.
-
Sensor PT – 100.
-
Outer Body Construction: Triple walled construction outer body made of Mild Steel powder coated.
-
The gap between the two walls filled with mineral wool with 4” insulation. Heating coil made from special air heater fitted on left & right side of oven. A forced air circulating with motor fitted on top for uniform temperature throughout the chamber
-
Inner Body made of Stainless-Steel grade S.S 304.
-
Chamber Shelves: Adjustable channel with clamp, User can very easy to adjust the shelve Hight as per requirement.
-
Shelves made by S.S 304 6mm Road.
-
U types Air Heater: special Nichrome heater designed for long life & saving of power consumption, it’s easy to installation and remove.
-
Working Temp range: 80 °C to 250°C.
-
Uniformity: +/- 1 °C. Accuracy: +/- 1 °C.
-
Insulation: high density Glass wool insulation between two walls to prevents heat dissipation.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Digital PID MICROPROCESSOR Temperature Controller with timer.
-
Sensor PT – 100.
-
Double walled construction fully made of Stainless-steel Inner S.S.316 & Outer 304.
-
Chamber Shelves: Adjustable channel with clamp, User can very easy to adjust the shelve Hight as per requirement.
-
Shelves made by S.S 304 6mm Road.
-
U types Air Heater: special Nichrome heater designed for long life & saving of power consumption, it’s easy to installation and remove.
-
Temp range: 50 °C to 250°C.
-
Uniformity: +/- 1 °C. Accuracy: +/- 0.5 °C.
-
Insulation: high density Glass wool insulation between two walls to prevents heat dissipation.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice
-
If required IQ PQ QQ charges extra. Onsite Validation charges will be extra as applicable.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz
Model
Optional Accessories
Features
-
Digital PID MICROPROCESSOR Temperature Controller with timer.
-
Sensor PT – 100.
-
Outer Body Construction: Double walled construction outer body made of Mild Steel powder coated.
-
Inner Body made of Stainless-Steel grade S.S 304.
-
Chamber Shelves: Adjustable channel with clamp, User can very easy to adjust the shelve Hight as per requirement.
-
Shelves made by S.S 304 6mm Road.
-
U types Air Heater: special Nichrome heater designed for long life & saving of power consumption, it’s easy to installation and remove.
-
Temp range: 50 °C to 250°C.
-
Uniformity: +/- 1 °C. Accuracy: +/- 1 °C.
-
Insulation: high density Glass wool insulation between two walls to prevents heat dissipation.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Digital PID MICROPROCESSOR Temperature Controller with timer.
-
Sensor PT – 100.
-
Outer Body Construction: Double walled construction outer body made of Mild Steel powder coated.
-
Inner Body made of Stainless-Steel grade S.S 304.
-
Supplied with air circulation motor with blower for uniform temperature throughout Chamber.
-
Chamber Shelves: Adjustable channel with clamp, User can very easy to adjust the shelve Hight as per requirement.
-
Shelves made by S.S 304 6mm Road.
-
U types Air Heater: special Nichrome heater designed for long life & saving of power consumption, it’s easy to installation and remove.
-
Temp range: 50 °C to 250°C.
-
Uniformity: +/- 1 °C. Accuracy: +/- 1 °C.
-
Insulation: high density Glass wool insulation between two walls to prevents heat dissipation.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Digital PID MICROPROCESSOR Temperature Controller with timer.
-
Sensor PT – 100
-
Construction: Tripled walled outer body made of Mild Steel powder coated & Inner Body of 2 chambers made of Stainless Steel 304.
-
Insulation: Glass wool Insulation between two walled
-
Chamber Shelves: Adjustable channel with clamp, User can very easy to adjust the shelve Hight as per requirement.
-
Shelves made by S.S 304 6mm Road.
-
U types Air Heater: special Nichrome heater designed for long life & saving of power consumption, it’s easy to installation and remove.
-
Temp range: 10 C above room temp to 250°C.
-
Temp Accuracy: +/- 1Deg.
-
Temp Controlled by: Microprocessor PID controller with dual display & auto tune facility.
-
Air circulation By: In this model we give Air circulation motor with blower for uniform temp inside chamber.
-
Motor cap: 1/12 H/P motor with 1440 RPM.
-
Insulation: high density Glass wool insulation between two walls to prevents heat dissipation.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Specially designed heating element that eliminate exposed heaters giving smooth Chamber surface.
-
The heat tempered full length Inner glass having window allows observation of load.
-
Radiant warm wall heat guarantees even heat distribution.
-
Chamber 316 SS with Exterior GI Powder Coated finish in REGULAR MODEL.
-
Interior 304 Matt/Buff finish & Exterior 304 SS Matt finish in GMP MODEL.
-
Two 316/304 SS valve-one for vacuuming and other for pegging/flushing.
-
Vacuum levels are controlled between 1” and 30” Hg.
-
Food grade silicon door gasket and highly aligned sturdy door fitting.
-
Perforated SS buffed trays for round models.
-
Smooth edges non-perforated trays for Rectangular Models.
-
Automatic auto tuning Microprocessor based PID Temp. Controller with Dual Digital Indicator & PT - 100 sensor.
-
Heating element made of best quality 80:20 Nichrome wire is wound on the outer surface of the inner chamber.
-
Temp Range: 50-degree C to 250-degree C.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Specially designed heating element that eliminate exposed heaters giving smooth Chamber surface.
-
The heat tempered full length Inner glass having window allows observation of load.
-
Radiant warm wall heat guarantees even heat distribution.
-
Chamber 316 SS with Exterior GI Powder Coated finish in REGULAR MODEL.
-
Interior 304 Matt/Buff finish & Exterior 304 SS Matt finish in GMP MODEL.
-
Two 316/304 SS valve-one for vacuuming and other for pegging/flushing.
-
Vacuum levels are controlled between 1” and 30” Hg.
-
Food grade silicon door gasket and highly aligned sturdy door fitting.
-
Perforated SS buffed trays for round models.
-
Smooth edges non-perforated trays for Rectangular Models.
-
Automatic auto tuning Microprocessor based PID Temp. Controller with Dual Digital Indicator & PT - 100 sensor.
-
Heating element made of best quality 80:20 Nichrome wire is wound on the outer surface of the inner chamber.
-
Temp Range: 50-degree C to 250-degree C.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Specially designed heating element that eliminate exposed heaters giving smooth Chamber surface.
-
The heat tempered full length Inner glass having window allows observation of load.
-
Radiant warm wall heat guarantees even heat distribution.
-
Chamber 316 SS with Exterior GI Powder Coated finish in REGULAR MODEL.
-
Interior 304 Matt/Buff finish & Exterior 304 SS Matt finish in GMP MODEL.
-
Two 316/304 SS valve-one for vacuuming and other for pegging/flushing.
-
Vacuum levels are controlled between 1” and 30” Hg.
-
Food grade silicon door gasket and highly aligned sturdy door fitting.
-
Perforated SS buffed trays for round models.
-
Smooth edges non-perforated trays for Rectangular Models.
-
Automatic auto tuning Microprocessor based PID Temp. Controller with Dual Digital Indicator & PT - 100 sensor.
-
Heating element made of best quality 80:20 Nichrome wire is wound on the outer surface of the inner chamber.
-
Temp Range: 50-degree C to 250-degree C.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Specially designed heating element that eliminate exposed heaters giving smooth Chamber surface.
-
The heat tempered full length Inner glass having window allows observation of load.
-
Radiant warm wall heat guarantees even heat distribution.
-
Chamber 316 SS with Exterior GI Powder Coated finish in REGULAR MODEL.
-
Interior 304 Matt/Buff finish & Exterior 304 SS Matt finish in GMP MODEL.
-
Two 316/304 SS valve-one for vacuuming and other for pegging/flushing.
-
Vacuum levels are controlled between 1” and 30” Hg.
-
Food grade silicon door gasket and highly aligned sturdy door fitting.
-
Perforated SS buffed trays for round models.
-
Smooth edges non-perforated trays for Rectangular Models.
-
Automatic auto tuning Microprocessor based PID Temp. Controller with Dual Digital Indicator & PT - 100 sensor.
-
Heating element made of best quality 80:20 Nichrome wire is wound on the outer surface of the inner chamber.
-
Temp Range: 50-degree C to 250-degree C.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories
Features
-
Also known as Environmental Test chamber or Stability chamber- Double Walled construction Inner body made of .S.S 304 & outer body made of M.D powder coated.
-
Inner full acrylic door to view sample &outer metal door with magnetic gaskets.
-
Forced air circulation fan with motor fitted on back side of unit.
-
Hermetically sealed Compressor fitted at bottom to provide cooling system in the chamber.
-
Air type heater for giving fast heating. Boiler tank fitted at back side of body to generate humidity in chamber.
-
PID temperature controller for RH & Temperature.
-
Temp. Range 10°C to 60°C. Accuracy ±1°C: Humidity RH Range 40% RH to 85%. Accuracy RH ±3% RH.
-
Documents: Controller calibrations certificate, User manual, Tax Invoice.
-
Warranty: 2 years manufacture’s defect warranty.
-
Operation on 230 volts ac single phase 50 Hz.
Model
Optional Accessories